Tripp Lite's 200-240V 16A Switched, Metered PDU system with Automatic Transfer Switching (ATS) offers 8 switched C13 outlets and 2 unswitched C19 outlets, plus a digital display to indicate total connected equipment power consumption level in amps. Switched outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup. Built-in web/network monitoring card enables remote power monitoring and programmable or real-time outlet control.. Remote interface displays status of input power, load capacity and outlet power status via secure network or web browser interface. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Programmable load ramping and shedding enables user-configurable startup and shutdown sequences, including UPS load management to automatically increase runtime for the most critical connected items by shutting down less critical items at user-determined intervals.. Supports notification and logging of input power status, event notification, output power and output loading conditions. Supports 1U rackmount installation in a 2 or 4 post racks. Integrated ATS / Auto-Transfer Switch provides a redundant power option for networking and server applications with non-redundant internal power supplies.. When both the primary and secondary C20 inlets are connected to two separate building circuits, UPS systems or other power sources, the PDU automatically will provide ATS protection to connected loads. In ATS mode, the PDU will normally maintain continuous output to all outlets as derived from the primary C20 input cable. If the primary power source becomes unstable or fails altogether in relation to the secondary, the ATS will switch over to the secondary power source until the primary input is restored.
Device Type: Power distribution unit - rack-mountable
Rack Size: 1U
Dimensions (WxDxH): 17.3 in x 14.8 in x 1.7 in
Weight: 10.4 lbs
Input Voltage: AC 200-240 V
Output Voltage: AC 200/208/220/230/240 V ( 50/60 Hz )
Output connector(s): 8 x power IEC 320 EN 60320 C13 ¦ 2 x power IEC 320 EN 60320 C19
Remote Management Protocol: SNMP
Power Distribution Units
Power Distribution Units
|Weight :||18 lb(s)|
from Tripp Lite
! 5 In Stock today.
Tripp Lite PDUMH20HVATNET - Power Distribution Unit (60586V) On Sale