Please note, this is a special order product that requires extra time for processing and shipping. Please refer to the individual timeframes stated above. If you have specific questions, contact our Customer Service Team at 1.800.680.0859 and we will be happy to help.
The Omnitron iConverter RS422/485 is a manageable serial RS-422 and RS-485 to fiber converter that transmits serial protocol over fiber media. Fiber transmission extends serial signals up to 120km, and is immune from electrical and magnetic interference.The RS422/485 automatically detects the signal baud rate of connected Full-Duplex serial device, ranging from 110 to 921, 600 baud. It also automatically adjusts to changes in the connected device's Full-Duplex baud rate during operation without reconfiguration or interruption of service.Half-Duplex RS-485 operation is supported via a configurable baud rate DIP-switch to match the master/slave communication timing.Connection to DTE or DCE devices is configured by an easily accessible DIP-switch on the front-panel. This feature eliminates the need to use specific serial cable for each type of device.A built-in remote Fiber Loop-Back DIP-switch provides easy validation of the entire fiber segment without interrupting fiber operations.Integrated configurable terminators support RS-422 and RS- 485 operations, allowing the unit to be deployed at any node in the serial line.
Additional Information: Omnitron iConverter RS422/485 - media converter
Device Type: Media converter
Enclosure Type: Plug-in module
Dimensions (WxDxH): 0.9 in x 4.5 in x 2.8 in
Weight: 0.4 lbs
Optical Wave Length: 1310 nm
Data Link Protocol: RS-422, RS-485
Remote Management Protocol: SNMP, Telnet
Max Transfer Distance: 18.6 miles
Features: Full duplex capability
Manufacturer Warranty: Limited lifetime warranty
Transceivers and Media Converters