Omnitron IConverter 10/100M2 - Media Converter

Omnitron IConverter 10/100M2 - Media Converter

(CK5011)
Sold As: Each
Our Price $810.14

Delivery in 8-15 business days. Inventory Out Of Stock: 0
free shipping
Free Shipping
Product Currently Out Of Stock.
 
Please note, this is a special order product that requires extra time for processing and shipping. Please refer to the individual timeframes stated above. If you have specific questions, contact our Customer Service Team at 1.800.680.0859 and we will be happy to help.


The 10/100M2 utilizes the iConverter Operations, Administration and Maintenance (OAM) management system to remotely monitor network status, configure hardware parameters, generate statistic reports and receive a variety of user-specified traps. The iConverter management system reduces operational expenditures by keeping "truck rolls" to a minimum through remote provisioning and instant trap notification capabilities. The iConverter 10/100M2 supports port access, enhanced bandwidth control, port MIB statistics, 2,048 byte frames and layer 2 control protocol (L2CP) policy control. The 10/100M2 features multiple, user-selectable link fault detection modes for quick fault detection and isolation. These modes operate independently of the network management and monitor the state of the cabling hardware:. Link-Segmentation (LS): the normal (default) mode where the UTP and fiber ports establish their links to other connected devices independently of each other. Link-Propagation (LP): in this mode (also known as "Link-Loss-Carry-Forward"), a link-out from the UTP port is generated only when a link-in to the fiber port is present, and a link-out from the fiber port is generated only when a link-in to the UTP port is present. In LP mode, a cable or link fault is propagated in a "domino" fashion to downstream or upstream connected equipment, enabling rapid fault detection. Asymmetrical Link Propagation (ALP): ALP has two modes of operation: copper-to-fiber and fiber-to-copper. In the 'copper-to-fiber' mode, a fault on the UTP port will propagate across the fiber to attached link partner, but not to the UTP port of the link partner. A fault on the fiber will not propagate at all. In the 'fiber-to-copper' mode, a fault on the UTP port will not propagate through to the attached UTP device. In this mode the "domino" effect is limited. Remote-Fault-Detection (RFD): in RFD+LS mode, each port transmits a link signal only when receiving a link. As a result, link faults (no link received) are looped-back and can be reported to the network core. Remote Fault Detection + Link Propagate (RFD+LP): in RFD+LP mode, link faults are propagated from the fiber to the UTP port and also looped-back to the fiber port. This mode provides rapid reporting of any cable faults to the network core. Symmetrical-Fault-Detection (SFD): SFD mode is similar to the RFD mode and provides a loop-back of a fiber link fault. When connecting two SFD configured converters "back-to-back", this mode facilitates fiber or UTP fault notification to both ends of the network.

Device Type: Media converter - RJ-45 / ST single mode
Enclosure Type: Plug-in module
Dimensions (WxDxH): 0.9 in x 4.6 in x 3.4 in
Weight: 8 oz
Cabling Type: 10Base-T, 100Base-FX, 100Base-TX
Data Transfer Rate: 100 Mbps
Optical Wave Length: 1310 nm
Data Link Protocol: Ethernet, Fast Ethernet
Remote Management Protocol: SNMP, Telnet
Max Transfer Distance: 18.6 miles
Features: Full duplex capability, auto-negotiation, VLAN support, manageable, Quality of Service (QoS), Remote-Fault-Detection (RFD), Link-Propagation (LP), Link-Segmentation (LS)
Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1ad, IEEE 802.3ah , FCC Class B certified, CE, UL
Manufacturer Warranty: Limited lifetime warranty

UPC: 0800975022362


MANUFACTURER NAME: Omnitron Systems
ITEM #: CK5011

Product Type: Transceivers and Media Converters
Review Snapshot® by PowerReviews Express
Be the first to review this product. Write a Review

Omnitron IConverter 10/100M2 - Media Converter (CK5011) On Sale

Get Social With Us!
ReStockIt BlogReStockIt TwitterReStockIt FacebookReStockIt PinterestReStockIt LinkedIn
Contact Us
FAQ
My Account/Sign In
Easy Reorder
Feedback
Give us a ring, we're happy to help: 1-800-680-0859
Click to Verify - This site chose Norton Secured SSL for secure e-commerce and confidential communications.
ABOUT SSL CERTIFICATES
Internet Retailer Top 500
ReStockIt belongs to BBBOnline Reliability Program