Devcon

Toughened adhesive for high strength load-bearing bonds to engineered plastics, metals, composites, ceramics, and dissimilar substrates

• Capacity Volume = 25 mL
• Packing Type = Tube
• Gap Fill = 1/8 in
• Adhesive Tensile Shear = 3500 psi
• Viscosity = 50000.0 cP
• Hardness = 78.0 Shore D
• Temp. Range = -40.0°F [Min], 250.0°F [Max]
• Fix Cure Time @ Temp. = 1 h @ 72°F
• Full Cure Time @ Temp. = 4 h @ 75°F
• Chemical Compound = Methyl Methacrylate
• Applications = Multi-Purpose
• Applicable Materials = Wood, Most Metals, Ceramic, Concrete, Plastic, PVC, Fiberglass, Steel, Aluminum, Stainless Steel, PET
• Resistance = Weather, Gasoline, Motor Oil, Moisture, Jet Fuel, Hydrocarbon, Hydraulic Fluid
• Usage = Adhesives
• Physical Form = Paste

Peel strength tested according to ASTM D1876-61P.|Resistance tested by immersion of bonded steel lap joints for 2 weeks in antifreeze, jet fuel, 10% and 50% sulfuric acid, and 10% and 20% potassium hydroxide, and by immersion for 2 months in gasoline at 72°F.|Shear strength tested according to ASTM D1002.|Compression shear strength tested according to ASTM D3931.|Impact resistance tested according to ASTM D950.

Attention California Residents: Prop 65 Warning
WARNING: This product can expose you to 1,3-Butadiene, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov


UPC: 078143143007
Click here for the Safety Data Sheet for this product.